Align esc question

[Jerrymac]

Hey guys, I got a package deal from a guy over at Freak that included a Gaui 550, a little Gaui 200 (with ton's of spare parts) and a Gazaur mars 480 for a real good deal.

Anyhow, there was also an esc included with all the stuff, that he said was an Align, but didn't say what model. It had a large piece of velcro stuck on it, and when I tryed to remove it the tag stayed glued to the back of the velcro and pulled off of the esc. It has a large heat sink on it. I soaked the velcro in some naptha and tried to pull the tag off. Buy the time I was done messing with it all I could read was 75G.

Anybody know what model this might be? Does it have a bec?
Also, if anybody knows, could you tell me how to program it. I don't really have much experience with Align stuff, so any help would be appreciated.

Thanks,

Jerry

[dunkonu23]

This:

www.experiencerc.com/store/k10301a_brushless_esc%28governer_mode%29_rce-bl75g-p-884.html

Jerry, it's programmed through the transmitter. Here's a link to the manual.

file.espritmodel.com/documents/RCE-BL100G.pdf

(I know the link says 100G, but it's for the 75G.

Scott

[Jerrymac]

Thanks much for the links bro. If the esc is in good working condition (don't know yet as it is used ) it is going into my Gaui "500" build.

Thanks again Scott,

Jerry

[9sec240]

Jerry, and FYI. That ESC has no internal BEC.

[Jerrymac]

Jun 3, 2010 23:34:11 GMT -5 9sec240 said:

Jerry, and FYI. That ESC has no internal BEC.

OK, thanks Ivan. I will have to get one as I don't think I have any laying around here.

[Jerrymac]

Well, I know this thread is old, but, just thought I would update it.

I put this esc in my HeadHunter 500 build. Ivan was right, it has no bec. The links Scott provided made it very easy to program it using the sticks on the TX. It works great so far. The soft start works very well, and it comes down cool even after a hard flight.
Not sure if Align makes this esc any more, but, it gets my thumbs-up.

[9sec240]

Align ESCs are not bad at all.

[Jerrymac]

Jun 29, 2011 21:13:04 GMT -5 9sec240 said:

Align ESCs are not bad at all.

I agree so far. Since I don't have any Align helicopters I have never used any of their esc's before this one. It seems to work great and was very easy to program.