Post by gunkle on Apr 19, 2010 20:27:42 GMT -5
Looking for a list of non-gaui parts (non electrical) that fit the 550. Think this might be a good resource to have in case of shortages or a desire to try something else. From my other thread I have been told the following:
Outrage 550
-undercarriage -- with redrilled holes
-tail fin - perfect fit with holes opened up slightly
- bracket for canopy posts on CF frame
Trex 500
-swash
-bearings --main shaft, washout arm and the Trex 500 seesaw bearing matches the tail pitch slider lever bearing on the Hurri
-landing gear
-tail blades -- you will need to adjust your gain on your gyro
Trex 600
-landing gear (minor modification needed) 3d skids was recommended over stock 600 skids as they add height but not as much
-thrust raced tail blade grips
-carbon tail blades
-tail fins (with some persuasion)
-flybar (longer = more stability)
Hirobo Shuttle
-booms need to be cut to length
Raptor 30
-flybars
-Quick UK Raptor 30/50 thrust bearing CNC tail grips
-Raptor 30/50 landing gear (redrill)
Misc parts not from other heli's
VXB - One Way Bearing
CNC Heli tails -- both V1 and V2 with V2 being the preferred due to thrust ed grips
KBDD - tail blades for 30/50 size helis -- fit without modification (need to adjust your gain.)
92mm tail blades -- Use larger tail fin for ground clearance -- some debate here
Traxxas - 12th mod .8(32p) pinnion
Robinson Racing 0.8 mod pinions from Tower Hobbies-www3.towerhobbies.com/cgi-bin/wti0001p?&W=001516175&I=LXVCW9&P=K
---4mm set screw + a broader range of sizes
Head Hunter Helicopters - Frames
Head Hunter Helicopters - Big Balls Bearing Mount
Head Hunter Helicopters - Easy Mesh Motor Mount
Custom Heli Parts - Offset adapters Futaba Servos
Custom Heli Parts - Offset adapter for Spektrum/JR Servos
Custom Heli Parts - Carbon Fiber Fin Set
Custom Heli Parts - Flybar Lock
Custom Heli Parts - Frame Support
Custom Heli Parts - Servo Adapters for most brands of servos
Custom Heli Parts - Battery Mount
ImpaktRC - Pinion gears www.impaktrc.com/index.php?cPath=186_295&sort=3a&page=2
Outrage Fusion 50 Pinions - Make sure they're installed with the set screw nearest the motor
outrage velocity/fusion 50 booms/tt will work, just use the gaui gears in the ends. I think the length should also work for belt drive too. As a matter of fact you could graft the whole tail assembly and just do the Gaui umbrella up front. Same model, landing gear works great and looks good too.
Thank you to those who have given these suggestions. Know that I always appreciate the people willing to share what they may have learned through others or their own trials and errors. If you know any other parts please share and I will update my list. Thanks
__________________
I copied this post from another forum and was wondering if you guys can maybe add to it if you haven't over there already.
---- Added new items, dunkonu23
Outrage 550
-undercarriage -- with redrilled holes
-tail fin - perfect fit with holes opened up slightly
- bracket for canopy posts on CF frame
Trex 500
-swash
-bearings --main shaft, washout arm and the Trex 500 seesaw bearing matches the tail pitch slider lever bearing on the Hurri
-landing gear
-tail blades -- you will need to adjust your gain on your gyro
Trex 600
-landing gear (minor modification needed) 3d skids was recommended over stock 600 skids as they add height but not as much
-thrust raced tail blade grips
-carbon tail blades
-tail fins (with some persuasion)
-flybar (longer = more stability)
Hirobo Shuttle
-booms need to be cut to length
Raptor 30
-flybars
-Quick UK Raptor 30/50 thrust bearing CNC tail grips
-Raptor 30/50 landing gear (redrill)
Misc parts not from other heli's
VXB - One Way Bearing
CNC Heli tails -- both V1 and V2 with V2 being the preferred due to thrust ed grips
KBDD - tail blades for 30/50 size helis -- fit without modification (need to adjust your gain.)
92mm tail blades -- Use larger tail fin for ground clearance -- some debate here
Traxxas - 12th mod .8(32p) pinnion
Robinson Racing 0.8 mod pinions from Tower Hobbies-www3.towerhobbies.com/cgi-bin/wti0001p?&W=001516175&I=LXVCW9&P=K
---4mm set screw + a broader range of sizes
Head Hunter Helicopters - Frames
Head Hunter Helicopters - Big Balls Bearing Mount
Head Hunter Helicopters - Easy Mesh Motor Mount
Custom Heli Parts - Offset adapters Futaba Servos
Custom Heli Parts - Offset adapter for Spektrum/JR Servos
Custom Heli Parts - Carbon Fiber Fin Set
Custom Heli Parts - Flybar Lock
Custom Heli Parts - Frame Support
Custom Heli Parts - Servo Adapters for most brands of servos
Custom Heli Parts - Battery Mount
ImpaktRC - Pinion gears www.impaktrc.com/index.php?cPath=186_295&sort=3a&page=2
Outrage Fusion 50 Pinions - Make sure they're installed with the set screw nearest the motor
outrage velocity/fusion 50 booms/tt will work, just use the gaui gears in the ends. I think the length should also work for belt drive too. As a matter of fact you could graft the whole tail assembly and just do the Gaui umbrella up front. Same model, landing gear works great and looks good too.
Thank you to those who have given these suggestions. Know that I always appreciate the people willing to share what they may have learned through others or their own trials and errors. If you know any other parts please share and I will update my list. Thanks
__________________
I copied this post from another forum and was wondering if you guys can maybe add to it if you haven't over there already.
---- Added new items, dunkonu23
