|
|
Post by billmay on Feb 8, 2010 14:22:11 GMT -5
For you Phoenix owners the final version of the H550 is now available through the automatic program updates. Since all I've done is hover my H50 so far, I can't tell you how realistic it is but maybe some of you that have flown yours around more and have Phoenix can comment.
Bill
....don't know if this was the right place to post this so the administrators can move it to another section if they prefer (maybe we need a flight simulators/software section??).
|
|
|
|
Post by dunkonu23 on Feb 9, 2010 1:33:47 GMT -5
Looks good to me... I flew it for about an hour today. I put the same mods on the model as I did on the beta. It's pretty accurate.
Scott
|
|
|
|
Post by billmay on Feb 9, 2010 9:40:08 GMT -5
Looks good to me... I flew it for about an hour today. I put the same mods on the model as I did on the beta. It's pretty accurate. Scott Scott, would you care to share the basic changes you made? Curious how they compare to what I did. I know I got rid of governor mode and the prebuilt curves plus changed motor and gear parameters to more closely match mine and made the main rotor larger etc. |
|
dubehigh
Junior Member
un-gaui
Posts: 64
|
Post by dubehigh on Feb 9, 2010 12:52:30 GMT -5
hey guys, i just got the phoenix a week ago, and did down load the new 550 + all the other ones that came with it.
? scott, how do you change the settings on phoenix to match your heli. thanks, fred.
|
|
|
|
Post by dunkonu23 on Feb 10, 2010 1:25:11 GMT -5
I'll let you guys know tomorrow... I'm at work right now and my sim is at home... In a nutshell, I changed headspeed, pitch, disk size, and tail rotor size. I'll give you all exact figures tomorrow.  Scott |
|
|
|
Post by dunkonu23 on Feb 10, 2010 11:12:18 GMT -5
Here are the settings I'm using: You find these settings by first loading the model, then under the model menu, select edit. Don't worry about making a copy, Phoenix does that automatically, so when you go to fly again, just select the copy - it will be called.... copy.  Expo: Elevator 50% Aileron 37% (Might seem like a lot, but it works for me!) Main Rotor diameter: 1.21 meters`(550mm blades plus the size of the head from blade hole center to blade hole center) Tail Rotor diameter: .247m (92mm tail blades, plus the size of the grips/hub, I actually measured mine) Max Positive Pitch: 12 Max Negative Pitch -12 Governed headspeed: 2250 And that's about it. I hope it helps! Scott |
|
|
|
Post by billmay on Feb 10, 2010 20:15:41 GMT -5
Thanks for your settings Scott!!
|
|
