9sec240
Full Member
naturalasperiphobic
Posts: 261
|
Post by 9sec240 on Apr 24, 2011 10:46:16 GMT -5
|
|
|
|
Post by Jerrymac on Apr 25, 2011 3:27:45 GMT -5
Looks like a nice design.  I haven't seen any specs on it yet. Wonder if they are running it on 12s or 6s x 2 in parallel for more capacity??? In one of the pics you can see 2- 6s balance plugs. In the last pic it looks like there is also a bearing at the bottom of the main shaft for more strength, which seems like a nice idea. The tail boom supports seem to be attached to the frame in an odd place though. Seems they should be lower on the frame to me. I like the direct to swash servo set-up better than the push-pull type on the Hurricane. It looks a little like the HeadHunter frame set up. Too much helicopter for me though. The field where I fly starts to get small even with my Hurri 550, plus, it looks like it would cost way more than my heli budget allows.  |
|
9sec240
Full Member
naturalasperiphobic
Posts: 261
|
Post by 9sec240 on Apr 25, 2011 19:38:50 GMT -5
It is 12S. A battery pack recessed on each side of the frame in the front. The packs are mounted to the carbon plates which appear to fasten to something inside the frame. Third bearing block is nice and it looks like there is a pinion support too. Curious how motor mesh is done.
|
|
I haven't seen any specs on it yet. Wonder if they are running it on 12s or 6s x 2 in parallel for more capacity??? In one of the pics you can see 2- 6s balance plugs.